十年

笑的好像大夏天

百花繚亂

紅魚缸

Dear HR Leadership:

Hello!

Recently learned that your company is recruiting a post proction engineer, I would like to try their luck. Allow me to introce myself, to disturb your precious time!

CVs

Intention job: manager or proction engineer.

Name: aa

Exit and Entry: aa

Sex: Male

Profession: Chemical Engineering and Technology

Date of Birth: February 7, 1980

Ecation: College in June 2001 and graated from College of Engineering XX

(Correspondence is now Nanjing University of Chemical Engineering undergraate)

Tel: xxxxxxx

E-Mail: xxxx

Work experience: 8 years working experience in chemical instry

Now position: regular day shift Proction Supervisor

Inaugural experience: the proction of craft

Shift in charge

Regular day shift charge

An overview of the indivial ability:

1. Familiar with proction processes in the proction of gas formaldehyde fixed-bed reactor technology, synthesis of chloro-methane proction process, trioxane proction process, including the process of flash concentrator, the reaction and the reaction of one distillation tower, extraction column, packed tower, bubble cap tower, ordinary distillation, shielding pumps, reciprocating pumps, centrifugal pump, multistage pump, steam jet pump, centrifugal blower, Roots blower, such as the commissioning and operation of equipment.

2. Familiar with the utility installed with activated sludge wastewater treatment process, screw compressed air equipment, preparation of molecular sieve nitrogen devices, preparation of yin and yang resin water tower installations.

3. Operation and quality adjustment control, to use PDCA rules and practices in the seven QC tools for the guidance of some of their work.

4. Familiar with DCS, PLC process control environment, and from the perspective of improving the control process.

5. 6S familiar with the scene management, and to develop effective 6S and give the implementation of improvement plans.

6. TS16949 system studied, to develop the general management of the standardization of documents, as well as the proction process of SOP.

7. A preliminary understanding of and participation in ISO14001 environmental control system and ERP enterprise resource planning to have a preliminary understanding.

8. To the proction of relevant documents, for staff training in effective security.

9. To provide a complete, effective proction planning, material requirements planning, material planning inventory indicators; deal with proction, quality, material unusual accident.

10. The proction of the recipients of the workshop materials, material loss control tracking, audit.

The contents of the current post:

1. To develop and modify the course of proction process related to SOP, revision and adjustment of process parameters.

2. Revise and update the PID map.

3. DCS control methods to adjust and correct PID parameters.

4. Through the development of a number of QC charts to control and track proct quality and proction process control.

5. The collection of some of the proction process, and organizations met to discuss solutions to develop into the relevant documents, training staff to operate.

6. A new factory to process the staff training.

7. To assist the proction manager of the factory 6S promote project management.

8. To help promote the facility ESH Division PHA project management.

Economic tide in the market today, I am deeply aware of what is needed now is not only a diploma, but the actual capability of the need to have a certain talent, in which, under the guidance of thinking, I still firmly believe that the pragmatic truth. The same pressures and opportunities, the talent market competition has become tighter, as well as the desire to come to the fore, prompted me to seek quality in their own enrichment and improvement.

lalala

找了些資料，不系統。以下為個人理解，供參考。

1、ET階段（Engineering Trial，工程調試——設計驗證階段）：在車型開發初期，有設計公司對白車身的精度以及各個空位的精度進行驗證和修正的階段。

典型要求：模具標準化，工藝標準化，零部件與整車結構標準化，品質判定標準化。

2、PT階段（Proction Trial，生產調試——生產驗證階段）：在通過了設計公司的設計驗證后，在小批量的生產過程中，對車身的線上可操作性、零件的品質及包裝的標準化進行驗證和改善階段。

典型要求：設備與工裝夾具到位，人員到位，物料配套到位，生產性達標（工藝直通率、品質保障力與物料批產驗證）

3、PP：預生產——初期量產

典型要求：工藝規范化、物流規范化，包裝規范化、工位器具規范化、節拍符合設計要求、人員與訓練組織到位

4、 SOP階段（Start Of Proction，小批量生產階段）：各項驗證完成，進入投放市場的小批量生產。

典型要求：按設計節拍實現標準化作業